Installation Instructions

Electrical Data
Panel Compatibility XL, Visio, XT, XTIP
Power requirements One 3.6 V Lithium battery
Nominal Voltage 3.6v
Low battery limit 2.7v
Battery type SAFT AA Lithium, LS14500
Battery life (estimated) Up to 4 years
Current Consumption
Standby (1h average) 35 uA
Max 70mA
RF technology S
2
View
®
Radio type Spread Spectrum Bidirectional RF
Operating frequency 915 MHz (US)
Transmission security AES algorithm encryption
Supervision Panel polls devices every 8 minutes
Antenna Integrated
Tamper detection Wall and cover tampered
Video sequence in intrusion 5 frames/s for 10 seconds
Motion detector technology Passive infrared DSP
Motion detector type Dual element
Motion Lens Fresnel
Motion Detection angle 90°
Motion Detection distance Up to 26 ft / 8m
Motion Detection pattern 24 facets
Operating temperature 14° - 104° F (-10° - 40° C)
Maximum relative humidity 75%, non-condensing
Certifications FCC Part 15C
Physical Data
Material ABS—ULV0
Dimensions (LxWxD): 2.95in x 2.16in x 2.16in
(75 mm x 55 mm x 55 mm)
Weight 3 oz./82 g (without battery)
Installation/Mounting
Camera/Base One screw secures camera to base;
two screws secure camera base to
mounting surface, flat or corner mount.
Mounting Height 6.9-7.5 Feet (2.1-2.3 meters)
PIR ITR601
INSTALLATION DATA SHEET
www.videofied.com