Installation Instructions

Mounting
>
Use proper tools and hardware.
>
Mount using 1/4” x 20 thread mounting bracket only.
>
Mount camera 7.5 to 9 feet (2.3 to 2.8m) from the floor.
>
Mount detector aimed at area to protect.
>
Do not aim detector at windows, especially those that
let in direct sunlight, or at heat sources such as lamps,
fireplaces, radiators, and heating vents.
>
Do not aim detector at moving objects such as curtains,
fans or animals.
1
Separate base from camera.
2
Hold mount base against
mounting surface and mark the
appropriate mounting holes.
3
Place camera mount on
mounting surface
so holes line up with
pilot holes/anchors and secure
base with appropriate screws.
4
Thread the MotionViewer onto the mount
WARNING : Do not cover the Fresnel lens !
Outdoor MotionViewer DCV651
INSTALLATION DATA SHEET
www.videofied.com
PIR Detection Pattern