Installation Instructions

Electrical Data
Panel Compatibility Xl, Visio, XT, XTIP
Power requirements Three 3.6 V Lithium batteries
Nominal Voltage 3V
Low Battery Limit 2.7V
Battery type SAFT AA Lithium, LS14500
Battery life (estimated) Up to 4 years
RF technology S
2
View
®
Radio type Spread Spectrum Bidirectional RF
Operating frequency 915 MHz (US)
Transmission security AES algorithm encryption
Supervision Panel polls devices every 8 minutes
Antenna Integrated
Tamper detection Wall and cover tampered
Camera sensor type CMOS black and white
Camera resolution 320 x 240 pixels
Camera sensitivity 0.2 lux
Camera lens Wide angle 85°
Camera response less than 100 milliseconds
after PIR detection
Video sequence in intrusion 5 frames/s for 10 seconds
Night illumination 2 infrared LEDs
Night illumination switching Automatic
Night illumination distance UP to 14 ft./ 4.5 m
Motion detector technology Passive infrared DSP
Motion detector type Dual element
Motion Lens Fresnel
Motion Detection angle 85°
Motion Detection distance Up to 40 ft./12 m
Motion Detection pattern 24 facets
Operating temperature 14° - 104° F (-10° - 40° C)
Maximum relative humidity 75%, non-condensing
UL Listings FCC Part 15C
1023 (applied for)
Physical Data
Material ABS—ULV0
Dimensions (LxWxD): 3-1/2 in. x 2-3/4 in. x 2-3/4 in.
(89 mm x 70 mm x 70 mm)
Weight 5.3 oz./150 g (without batteries)
Installation/Mounting
Camera/Base One screw secures camera to base;
two screws secure camera base to
mounting surface, flat or corner mount.
Mounting Height 6.9-7.5 Feet (2.1-2.3 meters)
Indoor MotionViewer DCV601
INSTALLATION DATA SHEET
www.videofied.com