Spec Sheet

• Wireless interactive technology
• Magnetic door contact function
• Universal wired input function
• Dual tamper
• Lithium powered - 4 years battery life
Description
The ICT Universal Door Contact is a battery operated, wireless
door contact designed for use in Videofied
®
security systems.
Door contacts are intended for use in detecting the opening and
closing of doors, windows, or cabinet doors/drawers.
The ICT consist of a switch detector with Wiselink - S2View
®
spread spectrum, Videofied, interactive, encrypted wireless
circuitry for secure two-way communications with the control
panel.
A dual tamper function provides detection for both wall and
cover tamper.
The transmitter is typically installed on the stationary surface of
an opening (door frame or window frame), while the magnet is
installed on the door or window.
With the door or window closed, the magnetic field forces a reed
switch inside the detector to close, creating a secured condition.
When the alarm system is armed and the door or window is
opened, the detector transmits an open signal. The control
panel receives this signal and responds according to system
configuration/programming.
The external input terminals accepts a normally closed or normally
open remote switch. You can connect a dry closed circuit (no
power) from standard hardwire intrusion or smoke detectors.
The detector is powered by one lithium battery that can last up to
four years, depending on the amount of detector activity.
The detector transmits a check-in signal every eight minutes
that includes its unique identification code along with the
current alarm state, tamper conditions, serial number, date of
manufacture, software version and battery status.
Features
> Wiselink - S2View
®
- Spread Spectrum, Videofied,
Interactive, AES Encrypted Wireless technology provides
optimum signal integrity and security.
> Supervised - transmits a check-in/status signal every 8
minutes indicating open/closed state, tamper conditions,
serial number, date of manufacture, software revision and
battery status.
> Dual tamper - provides detection for both wall and cover
tamper.
> External input - accepts normally closed (NC) or normally
open (NO) dry (no power) circuits from standard hardwire
intrusion devices, including fast response devices.
> Lithium battery - up to four years battery life.
Applications
Residential
> Doors
> Windows
> Cabinet doors/drawers
> Other similar openings
Commercial
> Doors
> Windows
> Overhead garage doors
> Cabinet doors/drawers
> Other similar openings
INDOOR CONTACT TRANSMITTER ICT 200/601/702/800
SPECIFICATION SHEET
DOC. - REF. 229-ICT
MODIF. DATE : FEBRUARY 2017
VERSION : XX.XX.XX
1