User's Manual

Made by RSI VIDEO TECHNOLOGIES
D
e
scr
i
p
t
i
o
n
The proximity reader can be placed in the interior or exterio
r
because the electronic card is weather proof. This device is use
d
for arming and disarming a VIDEOFIED
®
system. The recordin
g
of the badge reader in a recording area makes that area and al
l
devices in that area subject to the entry and exit delays.
C
h
a
r
a
c
t
e
r
i
s
t
ic
s
It is possible to record 19 badges, each badge takes the positio
n
of a user code. Example : 5 badges recorded + 4 keypad use
r
codes, remaining 10 codes and/or badges available.
In order to read the badge, the badge must be placed in contact
with the reader surface for approximately half a second (a bee
p
is emitted when the badge is read).
Remark : The total starting up and stopping are handled by the
badge readers ...
BR means BR650 for USA/Canada, BR750 for Australia/Singapore and
1
Base to be fixed
www.videofied.com
B
R
2
5
0
f
or
E
u
r
ope
and
r
es
t
o
f
t
h
e
w
o
r
ld.
Fixing point of the protection against
opening and pulling out
Wall tamper
punch out
Magnet for
tamper open on
the reader
Surface of the
badge reader
2 screws for fixing
Indicator LED
Mocate “TOP-HIGH”
PROGRAM Button
The recording of the badge reader in a
geographical recording area temporizes
the latter.
Recording of the proximity reader
The alarm panel must be put in "Recording device mode", an
d
t
DEVICE”.
he keypad must display “PRESS PROGRAM BUTTON OF
1
Fix the base with marks «TOP-HIGH», upwards.
Fix the screw under the base matter part, so
that the arming to be operational.
2
Insert, the first (lithium battery
LS14500), wait for 2 beeps of the reader then insert the
2 other batteries (in the same direction).
3
Press the PROGRAM Button, release as soon as the
indicator flashes.
4
Allocate a zone (with the keypad direction arrows),
validation by the touch [YES].
5
Give it a name and validate with the [YES] key.
Proximity Reader BR 250/651/752
I N S T A L L A T I O N D A T A S H E E T