Operator's Manual

Page 12
Version 1.4
Copyright © 2019 RSAE Labs
08-Apr -2019
3. Charging the Battery
This section describes battery maintenance of the GS-6C.
3.1. Battery Charger
The battery charger is designed for indoor use. Please refer to the Battery Charger manual for more
details on its use. The bottom of the charger describes the LED states and the indicated charging
phase by LED color.
The battery pack used for the GS-6C is a commercially available charger with a custom GS-6C battery
interface cap. The charger is described below.
DESCRIPTION
SPECIFICATION
Manufacturer
Cell-Con
Model
452415-NB
Wall Power Input
120-240 VAC, 1.3A Maximum
50-60 Hz
Output
Fast Charge: 4 A
Top-Off Charge: 560 mA
Trickle Charge: 130 mA
3.2. Removing the Battery Pack
Removing the battery pack is described in the procedure below. Once the battery pack has been
removed, it should be inspected for damage to the three terminals that mate with the main housing. If
any of these terminals are missing or damage, the battery pack must be replaced.
Once the battery pack has been removed, it is advised that the terminals be cleaned with a dry cloth
prior to charging.