Video Gaming Accessories User Manual

RSA SecurID Ready Implementation Guide
5
Set/Define Authentication SecurID
Specifies that a Security Dynamics ACE/SecurID server will be used for authentication.
Restrictions
You must be the privileged user to use this command.
Parameters
Primary
Specifies the first database or server to be checked. A specific address may be
set with the address parameter, or the None parameter may be used to indicate
that the database or file will not be used.
Secondary
If the LRS fails to authenticate the user using the primary database or server
(due to network failure, server failure, missing or incorrect username/password),
the secondary database or server will be checked. A specific address may be set
with the address parameter, or the None parameter may be used to indicate that
the server will not be used.
If the user cannot be authenticated using the secondary database or server, the
database or server with the next precedence level will be checked. If all
precedence levels fail to authenticate the user, the user is prevented from
logging in.
address
A text host name (if a DNS is available for name resolution) or an IP address in
standard numeric format (for example, 193.23.71.49).
None
Clears the current server address.