Troubleshooting guide

6: Performing Post-Migration Tasks 89
RSA Authentication Manager 6.1 to 8.1 Migration Guide
Edit Clients to the
RADIUS Server
Migration changes the IP address
of the RSA RADIUS server in
your deployment under the
following conditions:
• The version 6.1 RSA RADIUS
server was a remote RADIUS
server
• The version 6.1 RADIUS server
was a local RADIUS server and
you migrated version 6.1 using a
new IP address and hostname
When the IP address of the
RADIUS server changes, you must
update every RADIUS client to
use the new IP address, using the
tools native to the RADIUS client
device.
See the documentation for your RADIUS client
device.
Configure the default
RADIUS profile
If a RADIUS profile was
designated as the default profile in
version 6.1, the profile is migrated
to version 8.1 but it is no longer
designated as the default profile.
To specify this profile, or any
profile, as the default after
migration, use the Security
Console.
For more information, see the Security Console
Help topic “Configuring RADIUS Profiles.”
Test the RSA
RADIUS operation
Verify that RSA RADIUS operates
properly.
See Test the RSA RADIUS Operation
on page 92.
Configure
TACACS+ support
Version 8.1 does not support
TACACS+ on the same machine
as the primary instance. If you
used TACACS+ on the same
machine as the version 6.1
deployment, you must configure a
separate TACACS+ host and add it
as an agent in the version 8.1
deployment.
See Configure TACACS+ Support
on page 93.
Task Description Reference