Troubleshooting guide

104 A: Migration Data Conversion
RSA Authentication Manager 6.1 to 8.1 Migration Guide
View RSA Authentication Manager 6.1 Offline Emergency Settings
After migration to version 8.1, Authentication Manager applies the PIN options for
version 6.1 offline emergency codes to newly generated fixed passwords and one-time
password sets. You can view the version 6.1 settings that Authentication Manager
applies to these passwords.
Procedure
1. Open the RSA Authentication Manager 6.1 Database Administration application.
2. From the System menu, click System Configuration > Edit Offline Auth
Config.
3. Under Codes Contain, view the settings.
Add SecurID_Native as a Method of Administrator Authentication
If you see the following message in the migration report, you must configure the
Security Console to use the SecurID_Native method of authentication:
SecurId_Native authentication is allowed in the dump file.
As system settings were not migrated, an admin may not be
able to log into admin console using SecurID as an
authentication method.
This message is displayed in migration reports under the following conditions:
• Your version 6.1 Authentication Manager System Parameters include SecurID
cards, fobs, or USB as an Administrator Authentication Method.
• You did not migrate the System Parameters.
As a result, any Authentication Manager administrators who use SecurID cards, fobs
or USB tokens as their exclusive method of authenticating to the version 6.1 Database
Administration application will not be able to log on to the Security Console. You can
resolve this issue by migrating the System Parameters, or by enabling
SecurID_Native as a method of Console Authentication.
Procedure
1. In the Security Console, click Setup > System Settings.
2. Click Security Console Authentication Methods.
3. In the Console Authentication field, add SecurID_Native as an authentication
method.
4. Click Save.
5. Select Yes, update authentication methods configuration.
6. Click Update Authentication Methods Configuration.