Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company www.rstechserv.
IMPORTANT SAFETY NOTICE Fire Safety Conditional Approvals A fire safety conditional approval must be issued by an appropriate licensed electrical engineer for use of this sewer camera in areas of a sewer that have been demonstrated by testing and monitoring not to fall under the “Fire Safety Approval” requirement in Section 2540.2 of Title 8 of the California Code of Regulations.
Table of Contents PAGE 4 Product Overview PAGE 5 Operator and Equipment Safety PAGE 6 Equipment Compatibility PAGE 7 Camera Operation PAGE 10 Maintenance PAGE 12 Warranty Policy PAGE 13 MRA Merchandise Return Authorization Document Number 900-20571 Rev.
Product Overview The R.S.T. OMNI EYE II Camera is a pan and tilt color camera designed to be transported by the mainline tractor (or skidded) and powered by R.S. Technical Services single conductor (sincon) and multi conductor cable. The compact camera is adaptable for use in sanitary sewer, storm sewer, and fresh water pipelines with diameters of 6” to 24”. The camera transmits video and other transducer signals through the sincon cable to the Controller Power Supply.
Operator and Equipment Safety CAUTION: NEVER HOOK UP OR DISCONNECT EQUIPMENT WITH POWER TURNED ON! It is important to be familiar with operations, maintenance, and safety issues when working with RST equipment. Read the entire manual before operating the equipment. The Inspection System requires a steady supply of 120VAC to operate properly. Before starting of the generator or connecting shore power, make sure that ALL equipment has been turned OFF.
Equipment Compatibility The RST Omni Eye II color camera is designed for use with a mainline vehicle mounted systems as well as Portable Mainline systems. This pan and tilt camera requires the use of a power control unit, auxiliary controls box, skid or a tractor unit, and cable reel. RST Cable Reel RST Portable Cable Reel RST 8” Crawler RST Storm Drain Tractor RST Main Line Tractor Document Number 900-20571 Rev.
Camera Operation Ensure that the Camera ON/OFF switch is in the OFF position before connecting camera to tractor unit, or auxiliary control box to the Controller Power Supply. Set the LIGHT INTENSITY control to “MINIMUM” or full counter clockwise. Set the REEL SPEED control to the ‘MINIMUM” or full counter clockwise. When power is applied to the controller power supply the Frequency and Voltage indicators will be in the normal range. POWER FREQUENCY REEL CAMERA A.C. VOLTAGE MAX.
AUX. INPUT jack controls the external camera and transporter by means of auxiliary control box. The VIDEO LEVEL LEDS indicate the present of a camera video signal. Depending on the light in the pipe, the yellow or the green LED is lit. If the RED LED or NO LED is lit, this indicates a video problem. The LOAD VOLTS / LINE AMPS is an operation indicator that can be toggled to show the relative output voltage or current from camera power supply.
Auxiliary Control Box TRACTOR TRACTOR High Medium green Free Whl. LED TRACTOR Low Pan Left Pan RT CCW CW reverse Stop hold 3 sec. freewheel IRIS Iris Cl. Home STORM DRAIN TRACTOR CONTROLS Iris Op. FOCUS Foc. In Foc. Out Button function: Pan Lft Pan Rt. CCW CW Home/lights (camera) (camera) (camera) (camera) (camera) pan left pan right counter clockwise rotation clock wise rotation rotates camera to home Lower toggle switch functions: ` Iris Cl. Iris Op.
Maintenance Each time the Zoom camera is removed from the pipeline, wash the entire assembly. Inspect camera cradle and hardware. Inspect camera lens for scratches and cracks. Turn camera on and check light bulbs. Inspect the camera clamps, fins, skids and, mounting hardware. Inspect the power cable and watertight connections for damage. Inspect the bridle, clamps, skids, rails, and mounting hardware. Document Number 900-20571 Rev.
Document Number 900-20571 Rev.
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company SALES SERVICE PARTS LIMITED WARRANTY POLICY R.S. Technical Services, Inc. (RST) warrants all items of our manufacture for defects in materials and / or workmanship for one (1) years from date of receipt by the Customer. (unless otherwise stated) This policy is limited to items manufactured by RST. i.e. Camera, Reels, Controllers, Data Displays, Winches and Tractor Transport Vehicles.
MERCHANDISE RETURN AUTHORIZATION (MRA) POLICY All equipment sent in for repair or parts returned for replacement or credit MUST be accompanied by a completed Merchandise Return Authorization (MRA) form. If equipment or parts are received by R.S.Technical Services, Inc. (R.S.T.), without an MRA form or with a partially completed form, the equipment or parts will be held until an MRA form is received. Call either your Dealer or the R.S.T.
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company SALES SERVICE PARTS THE FOLLOWING FORM IS PROVIDED FOR YOUR CONVENIENCE MAKE COPIES OF THE FORM FOR YOUR USE. FILL OUT THE FORM COMPLETELY AND OBTAIN AN MRA NUMBER MAKE A COPY OF THE COMPLETED FORM FOR YOUR RECORDS INCLUDE THE ORIGINAL WITH THE EQUIPMENT OR PART (S) THAT ARE BEING RETURNED. Document Number 900-20571 Rev.
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company SALES SERVICE PARTS Merchandise Return Authorization (MRA) Date ___________________________ MRA # R.S.Technical Services, Inc. 1327 Clegg Street, Petaluma, CA 94954 SECTION I Customer Service Telephone: 1.800.801.1199 Customer Service Fax: 1.707.769.