Service manual

Electrical Service Manual V4.0
6
6-12
CENTRAL COMMAND II
SCREEN 2
To access this from screen 1, press the green page button
twice.
9: BATTERY METER - This meter shows the charge level of
the batteries in the machine. This gauge is designed to read
properly while the machine is in use and therefore will vary
during usage of the machine.
10: SCRUB HOURS - The hour total listed here indicates the
total number of hours the brush deck has been operated on
the machine.
11: TRACTION HOURS - The hour total listed here indicates
the total number of hours the traction drive has been oper-
ated on the machine.
12: KEY SWITCH HOUR METER - This hour meter rep-
resents the total number of hours the machine has been
powered on. This does not mean however that the machine
has been used this long just that it has had the power on for
the time indicated.
9. BATTERY GAUGE
10. SCRUB HOURS
11. TRACTION HOURS
12. KEY SWITCH HOURS