Service manual

2023 Service Manual V1.0
RI
RI-28
REPAIR INSTRUCTIONS
2/16/2006 2023-07 SQUEEGEE TOOL R&R Page 5 of 5
HELP HOTLINE: [phone]
4. Install the wing nuts on loosely.
5. Then starting from the center two screws hand tighten in the order
shown below.
8 7
6 5
4 3
1 2
6. Set squeegee on level flat surface and check to make sure the trail
wheels are the same distance from the surface. Most are adjusted
¼’’ to ½’’ from surface. If this is not an even amount squeegee will
not perform correctly. (see figure below)