Service manual

2023 Service Manual V1.0
RI
RI-27
REPAIR INSTRUCTIONS
2/16/2006 2023-07 SQUEEGEE TOOL R&R Page 4 of 5
HELP HOTLINE: [phone]
INSTALLING NEW SQUEEGEE TOOL TRAIL WHEEL
1. Hold trail wheel into position and install ¼’’ – 20 x 1’’5/8’’ bolt and ¼’’
nylon flat washers and ¼’’-20 nylock nut and tighten so wheel spins
freely.
REINSTALLING SQUEEGEE TOOL BLADES & BANDS
1. Install the Qty: (2) center screws into the squeegee tool band and
the squeegee tool front blade and install onto the squeegee tool.(see
figure below)
2. Install the remainder of the screws from the inside to the out side.
3. Install the rear squeegee tool blade and band.