Service manual

2023 Service Manual V1.0
RI
RI-26
REPAIR INSTRUCTIONS
2/16/2006 2023-07 SQUEEGEE TOOL R&R Page 3 of 5
HELP HOTLINE: [phone]
REMOVING SQEEGEE TOOL TRAIL WHEELS
1. Using a 7/16’’ 12-point box wrench and a 7/16’’ 12-point socket loosen
and remove the ¼’’ -20 x 1 5/8’’ bolt and ¼’’ 20 jam nylock nut and
Qty: (2) ¼’’ nylon flat washers. (see figure below)
REMOVING TRAIL WHEEL MOUNT
1. Using a 7/16’’ 12-point deep well socket loosen and remove the Qty:
(2) ¼ -20 x 1’’ bolts that hold down the trail wheel mount to the
squeegee tool. There is a 1/4’’- 20 lock washer under the front bolt, this
washer is for the correct angel of the trail wheel mount. (see figure
below)
INSTALLING TRAIL WHEEL MOUNT
1. Make sure that the ¼’’ lock washer is under the rear bolt and use a
7/16’’ 12-point deep well socket and tighten the front bolt first and then
tighten the rear one next. NOTE: DON’T OVER TIGHTEN.