Service manual

2023 Service Manual V1.0
RI
RI-24
REPAIR INSTRUCTIONS
2/16/2006 2023-07 SQUEEGEE TOOL R&R Page 1 of 5
HELP HOTLINE: [phone]
TIME REQUIRED: 15 MINUTES
NUMBER OF TECHS: 1 PERSON
REQUIRED PARTS
� SEE PARTS MANUAL FOR SQUEEGEE KIT PART #
REQUIRED TOOLS
� 7/16’’ 12- point box wrench
� 7/16’’ 12- point deep well socket
� # 2 Philips screw driver
NOTE: THE REAR SQUEEGEE BLADE IS DESIGNEDTO BE FLIPPED
OVER SO ALL FOUR EGDES CAN BE USED.
REMOVING SQUEEGEE TOOL BLADES
1. Using a # 2 Philips screw driver hold the # 10-32 screws and
remove wing nuts. (See figure below) NOTE: SET WING NUTS
DOWN IN THE ORDER YOU TAKE THEM OFF!!!
2. Remove rear squeegee tool band. (see figure below)