Service manual

2023 Service Manual V1.0
RI
RI-20
REPAIR INSTRUCTIONS
2/16/2006 2023-05 BATTERY R&R Page 3 of 4
HELP HOTLINE: [phone]
INSTALLING NEW BATTERIERS
1. When installing new batteries make sure that the terminals
are on the outside of the machine.
2. Reconnect the jumper wire. NOTE: MAKE SURE NOT TO
OVER TIGHTEN CONNECTTION.(see figure below)
3. Using a voltage meter check voltage between the negative
and positive terminal. Voltage should be 24 volts or slightly
higher. (see figure below)