Service manual

2023 Service Manual V1.0
RI
RI-11
REPAIR INSTRUCTIONS
2/16/2006 2023-03 SOLUTION FLOW VALVE R&R Page 4 of 5
HELP HOTLINE: [phone]
6. Using a 7/16’’ 12-point socket and a 7/16’’ 12 point box wrench
loosen and remove the ¼’’- 20x1/2’’ bolt and jam nut. (see figure
below )
7. Remove the solution flow valve.
NOTE: Before installing new solution flow valve check adjustment.
ADJUSTING NEW SOLUTION VALVE
1. Using a 7/16’’ 12-point box wrench loosen the ¼’’ – 20 nut.
2. Using a 3/16’’ flat head screw driver, back adjustment screw all the
way out. (see figure below)
3. Using a 3/16’’ flat head screw driver to hold adjustment, tighten the ¼’’-
20 nut using a 7/16’’ wrench to lock adjustment. (see figure below)