Service manual

2023 Service Manual V1.0
RI
RI-10
REPAIR INSTRUCTIONS
2/16/2006 2023-03 SOLUTION FLOW VALVE R&R Page 3 of 5
HELP HOTLINE: [phone]
2. Using a side cutters, cut the wire tie that holds the orange and black
wires to valve. (see figure below )
3. Using a needle nose pliers, carefully remove the orange and black
wire from valve. (see figure below)
4. Remove the ½’’ reinforced hose from the ball valve. (see figure
below)
5. Using a 13/16’’ open end wrench carefully loosen and remove the
ball valve from the solution flow valve.