Service manual

2023 Service Manual V1.0
RI
RI-7
REPAIR INSTRUCTIONS
2/16/2006 2023-02 SCRUB DECK ACTUATOR R&R Page 6 of 6
HELP HOTLINE: [phone]
INSTALLING NEW ACTUATOR
1. Hold new actuator with movable shaft in up position.
2. Install the ½’’x 2’’ clevis pin on the top of actuator to the machine.
3. Install the ½’’ Rue ring cotter.
4. Install the ½’’x 3/8’’x1’’ oil light bushing in bottom hole of actuator.
5. Install the 3/8’’x 2 ½’’ clevis pin on bottom of actuator.
6. Install the 3/8’’ Rue ring cotter.
7. Reinstall the Qty :( 2) down pressure springs.
8. Reinstall the Qty :( 2) ¼’’x20 jam nylock nuts.
9. Reconnect the male and female wire connectors.
NOTE: RED wire to PINK wire and ORANGE wire to WHITE wire.
10. Reconnect batteries
11. Close tank and reinstall the 5/16’’-18 x 3’’ bolts in relief ports and
tighten using the 3/16’’ Allen wrench.
12. Reinstall 3/16’’ Allen wrench back in location.