Service manual

2023 Service Manual V1.0
3
3-1
SQUEEGEE SYSTEM
SQUEEGEE SYSTEM
A scrubber’s squeegee system is designed to work with the recovery system to pick up
water and dirt from the floor using air flow created by the recovery system. The front blade
of the squeegee tool is designed with notches in it that allow the air, water and dirt to pass
through it while metering the air, increasing it’s speed through the tool and recovery system.
The optimal performance of a squeegee is very dependent on proper adjustment and main-
tenance. The machines recovery system also has to be operating properly for the squee-
gee to perform well.
The squeegee tool with replaceable rollers,
wheels & blades.
A suspension that mounts the squeegee to the
machine, and allows the squeegee to
move up and down with variations in the floor,
and pivot in turns.
A lift system that allows the operator to raise the
squeegee off the floor.
A vacuum gauge is a handy tool for checking this. You should be able to achieve 65” of water lift
on most models. Put the vacuum gauge in the end of the squeegee hose to check. If you have
questions on this tool setup call the factory at 800-634-4060.
SQUEEGEE SYSTEM COMPONENTS