Installation Instructions

Eclipse
™
Energy Guard
PO Box 1110 | Alexandria, LA 71309
[phone] | royomartin.com
7.0 Typical Sidewall-Roof Installation
Product Information & Installation Manual 07
Printed October 2009 I Made in the USA I © 2009 RoyOMartin
7.1 Fasten Eclipse™ Radiant Barrier Panels to wood
frame and apply
approved Energy Guard tape as
detailed in section 2.0.
(See Figure 7.1)
7.2 Install roofing underlayment according to
manufacture’s instructions adhering to all local
building codes.
(See Figure 7.2A)
Measure and cut IBC-approved adhesive ashing
width at least 12 inches. Install 6 inches of
flashing to Eclipse™ Radiant Barrier Panels
on
wall and 6 inches of ashing to
roofing underlayment.
(See Figure 7.2B)
7.3 Apply roong system and metal roong ashing
according to manufacture’s instructions, adhering
to all local building codes.
(See Figure 7.3A)
Install exterior wall system according to
manufacture’s instructions, adhering
to all local building codes.
(See Figure 7.3B)
Figure 7.2A
Figure 7.1
Figure 7.2B
Figure 7.3A Figure 7.3B
6”
6”