Owner manual
Electrical Specifications
Acoustic Operating Principle:" Electro-dynamic pressure gradient
Polar Pattern:" " " Figure-8
Generating Element:"" " 2.5 micron aluminum ribbon
Frequency Range:" " " 30HZ – 15,000HZ ± 3dB
Sensitivity:! " " " -36dBv Ref 1 v/pa
Self Noise:" " " " <18dB
Output Impedance:" " " 200 Ohms balanced
Rated Load Impedance:" " 1000 Ohms minimum
Maximum SPL:" " " > 135dB
Microphone Cable:" " " 7-Pin male to female XLR
Output Connector:" " " Male XLR 3 pin (pin 2 hot)
Vacuum Tube:" " " 5840-W miniature type with wire leads
Power Requirements:" " 100-120 VAC 50-60HZ, 220-240 VAC 50-60HZ
Fuse Type (2 Slo-Blo):" " Located in IEC power connector
" " " " " 200-ma for 110-120 volts, 100-ma for 220-240-volts
All Royer monaural microphones are also available in matched pairs.
Mechanical Specifications
High-grade Neodymium magnet assembly in Royer’s patented Flux-Frame
1.5” x 3/16” x 2.5-micron ribbon assembly
Stainless steel internal baffle and dampener
Dimensions:" " " 206 mm L x 25 mm W (8-1/8” L x 1” W)
Microphone Weight:!" 10.2 oz, 290 g
Power Supply Weight:" 3.5 lbs, 1.6 Kg
Shipping Weight:" " 15.5 lbs, 7 Kg
Finish: " " " Dull Satin Nickel, Matte Black Chrome or Gold Plate
Accessories:" " " Dedicated power supply, 7-Pin microphone cable, AC line cord,
" " " " protective wooden case, protective mic sock, RSM-1 shock-mount,
23