User manual

18
I N D USTRI A L
DIV ISION
A NIM A L
D I V I SION
LIVESTOCK
TECHNOLOGY
I N D USTRI A L
DIV ISION
A NIM A L
D I V I SION
LIVESTOCK
TECHNOLOGY
When a tag with an associated alias is scanned, an image as indicated
to the side will appear on the display.
- If the alias associated to the tags is the same in the device, no operation is performed
- If there is already an association of the tag but the name changes, the device invalidates the
previous alias and saves again.
The alias can contain spaces and the following characters:
“0123456789ABCDEFGHILMNOPQRSTUVWXYZ”
In the case in which the alias assigned exceeds the number of characters that can be visualized on a
row of the display, it will automatically be shortened.
16
17
Assignment of 2 aliases by sending all 64 hexadecimal bits to the
device, indicating APPEND mode.
To be able to insert the custom lots it is enough to create a text file (.txt file) on your PC that has
within it a syntax as reported in section 6.1.
Once this file has been created, the scanner must be connected to the PC through the USB cable
and the text file copied within the mass memory of the scanner, where the files ALIASDEC.CSV and
ALIASHEX.CSV are already present. The success or not of this operation is indicated by a message
The procedure described so far is reported step by step below.
that appears directly on the scanner’s display (see section 6.2).
commands are:
“H”,”APPEND” The list that follows in the text file is composed of hexadecimal
17
“H”,”ERASE” The list that follows in the text file is composed of hexadecimal
the device’s memory.
present in the memory and allows the addition of new ones
at the end of the previous ones.
I N D USTRI A L
The rows following the first one must instead respect the following syntax in order to name a custom
The syntax to follow within the text file requires that the first row reports::
“0123456789ABCDEFGHILMNOPQRSTUVWXYZ”
The custom LOTS names may contain spaces and the following characters:
In the case in which an alias that is already present in the memory is returned, we will have:
6. Insertion of the custom LOTS
6.1 LOTS Syntax
- indications on the deletion of the LOTS previously inserted (ERASE command) or on the desire to
insert new LOTS not deleting those previously inserted (APPEND command). The two possible
characters. The ERASE command deletes the LOTS already present in
characters. The APPEND command does not delete the LOTS already
LOT:
"FFF000000000","LOT Name"
The hexadecimal string (3 "F" and 12 "0") is an unique command to tell
a new custom LOT will be created with a certain name.