User manual

4
5
I N D USTRI A L
DIV ISION
A NIM A L
D I V I SION
LIVESTOCK
TECHNOLOGY
I N D USTRI A L
DIV ISION
A NIM A L
D I V I SION
LIVESTOCK
TECHNOLOGY
I-READ is a portable reader for the scanning of RFID tags compliant with the ISO standards 11784 and
11785.
I-Read supports the FDX-A, FDX-B and HDX protocols and is powered by a 9V battery. The information
relative to the ID of the scanned tag is available directly on a color display and can be downloaded
1. Introduction 2. Quick use guide
Display
Power on/off
button
Read
button
Selection
button
Buzzer
USB
1. Remove from Box
Reader - Cover - Battery
2. Insert the battery paying attention to polarity.
3. Make sure that the battery is placed in the right position,
and close the battery cover.
4. To turn on/off the reader, press the ON/OFF button.
5. “Firmware - Bootloader”
On the screen appears for 5 second the version of the software and
the Bootloader.
to a PC through a USB cable. It is also possible to associate some aliases to the different tags scanned.
The logo of the blue floppy disk is specific to the version of the firmware
6. Main screen, that can be customised with the distributor’s logo. The
current lot number is showed in the bottom centre.
group of scanned tags.It's also possibile to associate some aliases to the different scanned tags.
with LOTS and ALIASES and indicates the usage state of the memory
reserved for the LOTS and ALIASES insertion.
This version has been designed to manage different animals' lots associating a LOT name/number to a