SDS

SAFETY DATA SHEET
Page : 4 / 10
Revision nr : 1
Issue date : 30/04/2015
Difluoromethane &
Pentafluoroethane
Supersedes :
8.2. Engineering controls
Engineering control measures : Provide adequate ventilation.
Organisational measures to prevent/limit releases, dispersion and exposure
Safe handling: see section 7 .
Environmental exposure controls : Do not allow contact with soil, surface or ground water.
Comply with applicable Community environmental protection legislation.
8.3. Personal protective equipment (PPE)
Personal protection equipment : The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific
workplace.
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory equipment.
Hand protection : cold insulating gloves
Eye protection : Use suitable eye protection.
Body protection : Wear suitable protective clothing.
Thermal hazard protection : cold insulating gloves
SECTION: 9. Physical and chemical properties
9.1.Information on basic physical and chemical properties
Appearance : liquid,Gas
Colour : Not applicable
Odour : Ether
Odour threshold: : No data available
pH : 7
Melting point/freezing point : No data available
Initial boiling point and boiling range : -48,5 °C
Flash point : No data available
Evaporation rate : No data available
Flammability (solid, gas) : Non flammable
Upper/lower flammability or explosive limits : No data available
Vapour pressure : No data available
Vapour density : No data available
Relative density : No data available
Water solubility : No data available
Solubility in different media : No data available
Partition coefficient n-octanol/water : No data available
Auto-ignition temperature : > 750 °C
Decomposition temperature : No data available
Viscosity : No data available
Explosive properties : Not applicable,The study does not need to be conducted because there are
no chemical groups associated with explosive properties present in the
molecule.
Oxidising properties : Not applicable
The classification procedure needs not to be applied because there are no
chemical groups present in the molecule which are associated with oxidising
properties.