Installation Guide

8. Child-Lock Mode- To lock the control panel, press and hold the “TIMER” button for 3 seconds.
Locking the control panel prevents someone from accidentally changing the settings. When locked, the
“Lock” Indicator will light up. Press and hold the “TIMER” button for 3 seconds to unlock the control
panel.
9. Internal Pump Mode (RDH-270P Only)- The internal pump allows the unit to operate without
having to empty the bucket and requires the installation of the included pump drain hose kit. To install
the kit, remove the drain cap on the back of the unit. Insert the included gasket into the front of the
included pump adapter. Force the included clear drain hose onto the pump adapter and turn adapter
clockwise onto the garden hose type nozzle on the back of the unit. Once securely installed, lead the
drain hose to a nearby drain, sink, or out a window. Turn on the dehumidifier and press the “PUMP”
button to activate the internal pump. The “Pump” Indicator will light up.
9
AUTOMATIC DEFROST
When frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run
until the frost disappears. When the coils are completely defrosted, the compressor or fan (depending on
the model) will automatically restart and dehumidification will resume.
NOTE: Water can be pumped up to 13 ft. Make sure there are no kinks or knots in the hose.
NOTE: In Pump Mode water may begin to rise in the bucket, but do not worry the bucket will not overflow.
The pump will continuously remove water and prevent the bucket from completely filling up.
PRODUCT OPERATION