Installation Guide

Control Panel

NOTE: When first operating the dehumidifier, run it in Continuous Mode for 24 hours.

1. Power On and Off - Press the “POWER” button once to manually turn the unit on. Press the “POWER”

button once more to turn the unit off.

2. Humidity Selection - Press the ˅ or ˄ buttons to choose the desired relative humidity in the room. Each

press of the button will change the desired room humidity by 5%. The room humidity is selectable from

35% - 80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the digital

display. If you want the dehumidifier to operate continuously regardless of the room humidity, press the

“MODE” button until you see "CO" on the digital display. This will enable continuous operation and the

"Continuous" Indicator will light up on the control panel.

3. Fan Speed Control - Press the “FAN” button to cycle through the different fan speeds: High and Low.

The fan speed can be visually distinguished by the fan speed indicators on the control panel.

PRODUCT OPERATION