Owner Manual

<7> INSTALLING THE BENCH

1. Install the bench by sliding it over the horizontal bench guides on

the side panels. Keep the two little blocks on the bottom to the front side.

2. Push the bench all the way in until it can touch the back panel and

is securely in place.

<8> CONNECTING THE FRONT PANEL TO SIDE PANEL

<9> PLACING TOP PANEL

Lower the roof panel onto the assembled panels.

1. Gently place the top panel onto the rest of the assembled panels. When

four corners are in place, gently push down the roof panel from the

outside corners until it is snugly fit over the rest of panels.

2. Make sure the cables do not get pinched between the panels.

3. Leading the wires of heaters onto the board through the corresponding

hole.

4. Fix the roof panels by 4 screws to make sure it is stable enough.

Outside

buckles