Owner Manual

11
5. Sauna Time Adjustment
Session time can be set between 0 and 90 minutes.
a) Press TIME UP/DOWN ARROWS to adjust time, time value will
increase or decrease by 1 minute at a time.
b) By holding down the UP/DOWN ARROWS you can speed up the
rate of change.
c) Time light will be lit to indicate changes being made to time
setting.
d) If you don’t input anything during 5 seconds, the TIME DISPLAY
will stop flashing, the value will be stored in memory as preset value.
Then the TIME DISPLAY value will show how much time is left in your
sauna session decreasing 1 minute at a time.
6. Sauna Temperature Adjustment
Session temperature can be set between 68°-150° (20°-65°)
(Recommend environment temperature is 68° (20°) and Recommend
temperature settings are between 100°-130° (38°-54°)
a) Press TEMP UP/DOWN ARROWS to adjust temperature,
temperature value will increase or decrease by 1 degree at a time.
b) By holding down the UP/DOWN ARROWS, you can speed up the
rate of change.
c) 0F(or 0 C) will be lit to indicate changes being made to
temperature setting. If you don’t input anything during 5 seconds,
TEMPERATURE DISPLAY will stop; present value will be stored in
memory as preset value and will be displayed at next start up. And the
TEMPERATURE DISPLAY value shows the sauna room inside current
temperature.
d) During session time, when the temperature reaches the setting
level on the control panel, “Warming” indicator light will be off, micro-
control will force the heaters to stop heating and keep a constant-
temperature status. The heaters will turn off and on periodically in order
to maintain the desired temperature inside the sauna.
7.Switch between 0F and 0 C
You can alternate between Fahrenheit and Celsius while in setting
mode by pressing 0F / 0 C buttons.