RACK EQUIPMENT INSTALLER SERIES METAL RACKS INSTALLATION MANUAL ROY2212 | ROY2213 | ROY2214
CONGRATULATIONS Congratulations on purchasing your new Royal™ Installer Series Metal Rack. The new 2200 Series of metal cabinets are are made from strong steel with a black, powder coat finish and come jam packed with custom features you’ll love. Available in 12u, 16u, and 21u models these racks ship with our new and improved assembly screws to make installation easy and include several carefully placed knock-outs for equipments cables and thermal management units.
IN THE BOX Included: a. Top Plate b. Bottom Plate w/ Pre-installed Casters c. Side Panels d. Vertical Support Bars e. Accessory Screws f. Assembly Screws a. b. c. d. PLEASE NOTE: e. f. Maximum load capacity for these racks is 600lbs. Using a combined equipment weight that is heavier than the max load indicated may result in instability causing possible injury. ASSEMBLY Lock the casters before starting assembly.
KNOCK-OUTS We’ve included several carefully placed knock-outs within our new line of racks! Unlike others, we’ve laced our racks with (2) 2-inch holes at the top, on the base, and along the sides enabling you to easily run wires/cables to your equipment. We’ve also added (2) 120mm knock-outs at the top & bottom of the rack, which allow you to easily add the proper thermal management system.
