5" Digital Control LED Indicator Multi scan Color Green Monitor User's Guide X-554 PCC 1D: HIRSUTE-354
IMPORTANT SAFETY INFORMATION Read all of these instructions carefully, and save them for reference. Follow all warnings and instructions marked on the product. Clip the swivel base on to the monitor before installation Unplug the monitor from the system unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
The monitor is equipped with a three-wire grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug. Do not allow anything to rest on the power cord.
When the video monitor exhibits a distinct change in performance. e To ensure satisfactory operation, use the monitor only with UL Listed computers which have appropriate configured receptacles marked between 100 240 VAC, Min. 1.2A. » When use with external speakers, to ensures satisfactory operation use with UL Listed Class 2 adapter which have appropriate electric rating 100 120 VAC or 220 240 VAC.
FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed lo provide reasonable protection against harmful interference in a residential installation.
TABLE OF CONTENTS GENERAL DESCRIPTION... PACKAGE CONTENTS . J NPR Installing and Removing the Swivel Base [SEN INSTALLATION... .. Safety Checks . Connecting the Video Cable So Connecting the Power Cord. . © ww OPERATION Ce Turing on the Monitor Basic Adjustments Advanced Adjustments . How to Adjust a Setting . . oo Function and Description of the LED . Auto Save Function . © NOON SSD POWER MANAGEMENT TROUBLESHOOTING Picture Poor Picture. . ..
GENERAL DESCRIPTION This monitor is a high-performance intelligent multi-scan color monitor. It is designed to be compatible with ali modes between 30 kHz and 54 kHz. (engineering design 29 55 kHz) The microprocessor-based design was implemented with the user in mind, providing digital user controls for precision, auto synchronization and auto sizing for convenience and interoperability for flexibility. This monitor comes with a tilt and swivel base for comfort in prolonged usage.
PACKAGE CONTENTS Choose the most convenient location for your monitor and avoid using sharp abject in opening the carton. Open the shipping carton and check the package contents. The package should include the following items: » Swivel base . Monitor . Power cord if any items are missing, contact your supplier immediately. Remove the monitor from its shipping carton. Save the carton and packaging materials, in case you ever need to pack and relocate the monitor.
INSTALLATION Safety Checks Make sure the monitor and system unit power switches are off, when you start connecting cables. This monitor is set for 100-240 Vac 60/50 Hz (full range). Confirm the line voltage for your monitor by checking the voltage label on the rear panel of the monitor. liege late Figure 3 Connecting the Video Cable and Power Cord Connecting the Video Cable The monitor comes with a built-in video cable. To connect the video cable, follow the steps below: 1.
OPERATION Turning on the Monitor The power switch is located at the bottom of the rear side. (See Figure 4) Press the power switch to turn the monitor on or off. Figure 4 The Power Switch The control knobs are located on the front side. (See Figure 5 and 6) Use these controls to adjust the picture according to your personal preferences. Figure 5 Brightness and Contrast Controls Basic Adjustments Brightness: Adjust the picture brightness of the screen.
intensity of the screen Advanced Adjustments Fb Til INDICATOR Figure 6 Function Buttons and Indicators Up: To increase the setting of a function or to execute the function Degassing or Recall. Down: To decrease the setting of the function. Right: To switch to the next function. Left: To switch to the previous function.
How to Adjust a Setting 1. Press move the indicator to the desired function. First, the "Superpower” LED does not light and you can select one of the 4 functions on the upper row (V-size, V-center, H-width and H-phase). If you press > several times, the "Upper/Lower” LED lights, and you can adjust or execute the functions on the lower row {Pincushion, Trapezoid, Degassing and Recall). See figure 7 2. Press change the adjustment of the currently chosen function.
Trapezoid To adjust Trapezoid distortion. 3 Degassing To correct display distortion or discoloration due to magnetic field interference in case you have moved the monitor while in operation. © 1 Recall To gel the factory preset parameters for V-size, V-center, H-width, Phase, Pincushion and Trapezoid. Auto Save Function The monitor provides an auto save function. After you have changed any of the settings and waited for about 10 seconds, the new values will be saved in the monitor's non-volatile memory.
POWER MANAGEMENT This monitor meets the power management standards as set by the Video Electronics Standards Association (VASE) and Jor the United States Environmental Protection Agency (EPA). This feature is eds-igned to conserve electrical energy by reducing power consumption. This function is actives by an operating system or Windows utility program which turns off the monitor display and also turns off, or changes the color of the monitor's power LED.
TROUBLESHOOTING This section provides solutions to minor problems you may encounter when installing or using this monitor. If the problem persists after trying the suggestions in Table 1, contact your place of purchase. No Picture Check that both power and sigma cable are securely connected. Adjust the brightness and contrast controls. Poor Picture «Adjust the brightness and contrast controls. Check your display adapter configuration. (Refer to your display adapter manual.
TECHNICAL INFORMATION Precautions s Only a qualified service technician should open the monitor case. Components inside the monitor can cause serious electric shock, Do not attempt to remove the back cover of the monitor by yourself. Contact your monitor dealer or authorized service personnel if your monitor needs to be repaired. e To prevent fire or shock hazard, do not expense this monitor to rain or moisture. Specifications CRT: 1. Visible Size : 35 cm (15") max. Screen Diagonal 2.
Power supply: 1. Input voltage 2. Consumption Environment: 1. Operating Temperature Humidity 2. Non operating Temperature Humidity Dimension: 1 100 240 Vac 60/50 Hz + 100 Watts maxim urn 10°C to 40°C 120% 10 80% 20°C to 65°C 110% to 85% 370 mm(Wx 367 mm(H)x 330 mm{D} {with base} Weight: Approx. 12 Kuznets) X-Radiation: DHS PTB (Self Certificated) Regulatory: Optional Optional TUB-GS . Optional NORDIC 1 2 3. Optional MPR II (MPR 1990:10) 4 5 .
