IMPORTANT SAFETY INFORMATION Read ail of these instructions carefully, and save them for reference. Follow all warnings and instructions marked on the product. Unplug the monitor from the system unit before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Use only attachments recommended by the manufacturer; unapproved attachments may be hazardous.
Do not allow anything to rest on the power cord. Do not locate the monitor where people may walk on the cord. To protect the monitor during a lightening storm or when it is left unattended and unused for long periods of time, unplug it from the system unit. This will prevent damage to the monitor from lightening and power surges. Do not overload power outlet and extension cords. Overload can result in fire or electric shock. Never push any object into the soot in the monitor cabinet.
FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant fo Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TABLE OF CONTENTS INTRODUCTION GENERAL INFORMATION. CHECK LIST. LCD MONITOR SETUP. 2.1.1 POWER CABLE CONNECTION. 2.1.2 SIGNAL CABLE CONNECTION. 21.3 USER INTERFACE CONTROL. OSD CONTROLS... 3.1.1 MAIN MENU 3.1.2 AUDIO MENU. 3.1.3 RECOMMEND SOLUTION AND MODE R-5 FRONT PANEL CONTROLS. 3.2.1 MENU/EXIT BUTTON. 3.22 BRIGHTNESS KEY FUNCTION. 3.2.3 CONTRAST KEY FUNCTION. 3.24 POWER BUTTON. 3.25 AUDIO... 3.26 MUTE. POWER LED.. PLUG AND PLAY DDC FUNCTION... USB FUNCTION... DISPLAY POWER MANAGEMENT. TROUBLESHOOTING.
1. INTRODUCTION 1.1 General Information The R-5 is a 15-inch intelligent LCD monitor with ultra high resolution of up to 1024 x 768. The microprocessor-based design was implemented with the user in mind. We invite you, the proud new owner of this fine monitor, to read this user's manual before operating, in order to get the most out of this product. 1.2 Features Hn }5.X" Large Size XGA TFT LCD Panel " x Pixel pitch TFT LCD Panel # Low Radiation Lower Power Consumption x Ergonomic Style ID rt © Max.
0 0 ESE Toe Pe ee ae USB Downstream Port US8 Downstream Port Linen USB Upstream Port Earphone in Ides In Power Switch Notice: USB function is by order.
2. SETUP 2.1 LCD Monitor setup 0 USB Downstream Port USE Downstream Port Linen {SB Upstream Port Earphone In Video ln 0 Power Switch Al Notice: USB function is by order. Figure 2 244 Power Cable Connection e Plug the power cable into the wall outlet, the other end of the power cable into the AC socket. 24.2 Signal Cable Connection Connect the VGA ca le to the back of R-§ monitor. . 243 Power On Turn on the power of bath your R-5 monitor and your computer.
3. USER INTERFACE CONTROL There are some switches, power LED and OSD menu on the R-5. These are to provide the users an easy way to adjust video and audio. A description of these functions is as follows: 3.1 OSD Controls Teo make any adjustment: wo = Press (ENTER) key te make this item adjustable. Adjust the item that you selected by turning the flywheel. 3.4.1 Main Menu = CONTRAST CONTRAST(P): Adjusts the contrast control, BRIGHTNESS (FF): Adjusts the brightness control. 3.
10. 11 12. FINE TUNE (EEE) : Shifts the pixel clock phase when video hitter happens or focus is not perfect. Video hitter may cause by the difference of VGA card or the big change in weather, curd 1; 82) Step 1: Select begin adjusting by turning flywheel. Step 2: Use the (ENTER) key to make this item adjustable. Step 3: Adjust the item by turning flywheel. Red Control { R ) Increases/Decreases the red video gain level. Green Control ( G ) Increases/Decreases the green video gain level.
3.2 Front Panel Controls ENTER MUTE sneer EXCITEMENT AUDIO Figure 3 3.21 Menu /EXIT Button Press this button to show OSD menu or disable OSD menu. 322 Brightness Key Function Turn the flywheel clock wise to adjust the brightness directly. 323 Contrast Key Function Turn the flywheel counterclockwise to adjust the contrast directly. 3.24 Power Button & ) Press turn the power on or off. 325 Audio Press this button to show audio OSD menu or disable audio OSD menu.
4. PLUG AND PLAY 4.1 DDC Function The Display Data Channel “DDC” will allow the display to inform the hast system about its identity and depending on the level of DDC used, communicate additional levels of display capability. DDC 1: One uni-directional data channel. DDC 2: One bi-directional data channel. L41T can support display type DDC1/2B. 42 USB Function Four downstream ports & one upstream port. Self power function. Each downstream port supply 500mA(max). Compatible with USB version 1.0.
5. DISPLAY POWER MANAGEMENT This monitor meets the power management standards as set by the Video Electronics Standards Association (VASE) and /or the United States Environmental Protection Agency (EPA). This feature is designed to conserve electrical energy by reducing power consumption. This function is actives by an operating system or Windows utility program which turns off the monitor display and also turns off or changes the color of the monitor's power LED.
6. TROUBLESHOOTING Problem Problem Problem + No picture appears on the screen. If power LED is off, check if power cable is securely connected. If power LED is amber in color, check if video cable is securely connected. Also check if your computer is switched on. 1f power LED is green in color, check if H SYNC frequency is out of range. Adjust the brightness and contrast controls. ; Picture is unstable (noise, hitter ete) Check the timing of your computer and see if thy are compatible with R-5.
7. Appendix: TECHNICAL INFORMATION Precautions « Only a qualified service technician should open the monitor case. Components inside the monitor can cause serious electric shock. Do not attempt to remove the back cover of the monitor by yourself. Contact your monitor dealer or authorized service personnel if your monitor needs to be repaired. «To prevent fire or shock hazard, do not expose this monitor to rain or moisture, Specifications LCD Panel: 1. Display Area 2307.2 (H) x mm 2.
1. Horizontal : 68 KHz max. 2. Vertical © 85 Hz max. USB Function(optional) i. Compatibility :USBVLD Power Supply: 1. AC INPUT 100 ~ 240 Vac, 50/60Hz, 1.2A 2. Consumption : XX Watts maximum Environment: 1. Operating Temperature: 0°C 10 40°C Operating Humidity Storage temperature 1 -20°C ~ 60°C Weight: Approx. 3.5 Kuznets) Regulatory: 1. Optional 2. Optional TU 3. Optional CE V-GS 4. Optional PRIM! 5.
