User's Manual

~ 9 ~
POWER MANAGEMENT
This monitor meets the power management standards as set by the
Video Electronics Standards Association (VESA) and / or the
United States Environmental Protection Agency (EPA). This
feature is designed to conserve electrical energy by reducing
power consumption.
This function is active by an operating system or Windows utility
program which turns off the monitor display and also turns off, or
changes the color or the monitors power indicator.
Mode
Signal Power
Cable H-Sync V-Sync Video Indicator
Consumption
ON* Attach Yes Yes Active Green
≤120W
Stand-by Attach No Yes Blanked Flashing Green
≤15W
Suspend Attach Yes No Blanked Flashing Green
≤15W
OFF Attach No No Blanked Flashing Green
≤3W
Override Attach No No Signal
Error
Green
≤120W
In the power on condition, this monitor also provides override
mode to lets the end user with a troubleshooting capability. The
override mode is not state of power management.
We recommend to switch off the monitor when it is not in use for quite a
long time.
The override mode means the monitor displays NO Signal if you
turn on the monitor before you turn on the computer. And the
power indicator shows green.
Note: If you turn off the computer before you turn off the monitor,
the monitor goes power management OFF mode. And the power
indicator shows blink green light.