User's Manual

~ 5 ~
Menu select(>):
To switch to next function in sequence.
Decrease (-):
To adjust function scale to smaller.
Increase (+)/Enter:
The key has two uses.
To adjust function scale to larger.
To select function (Recall, Degauss, Exit).
On Screen Display ( OSD ) Message
The OSD is a message that displays on the monitor screen. The
OSD message can show the function scale and the mode’ s
frequency. When user does not press key at 10 seconds later, the
OSD message is been off.
Figure 5 The OSD Message
Auto Save Function
This monitor provides auto save function for saving any controls
change. The auto save function acts when
1. Function Mode and Function Adjustment change immediately.
2. Function Mode persists and Function Adjustment changes at 10
seconds later.
Display Adjustment
Brightness
OSD window off Press－into the brightness adjustment window of OSD
message as figure 6. Press + to increase or－to decrease the display
brightness level.