Instructions / Assembly

Assembly

STEP 1

Requires: AA, BB, CC, DD, EE, FF, GG, A, B, C

Line up the bolt holes on the table leg (B) with the corresponding bolt holes on the

table ring (C). Screw the M6x45 screw (BB) with ﬂat washer (DD) and screw cap (EE)

using the Allen wrench (FF). Then tighten the bolt (AA) and ﬂat washer (DD) with bolt

cap (CC) by using the wrench (GG).

*Reminder - Do not completely tighten screws and bolts yet.

Repeat this step until all the table legs (B) are connected to table ring (C). Then

tighten screws and bolts.

FTS90042G

G G