Instructions / Assembly

Assembly
STEP 1
Requires: AA, A, C, D
Attaching the  Legs and the Support Tubes to the  
Place the
  (A) upside down on a soft surface. Attach the  legs (C) and the support
tubes (D) to the  top (A) using M6x30 combination bolts (AA). Do not fully tighten the bolts at
this step. NOTE: Loosely tighten the bolts using the hex wrench (CC).

Cleaning & Maintenance
• For best results, clean the frame with a damp cloth and dry thoroughly.
• This will help prevent mildew by removing dirt particles that may accumulate.
• Do not clean with abrasive materials, bleach, or solvents.
•
Store the  in a dry, sheltered place when not in use.
•

weather such as rain, hail, sleet, snow, or wind.