Assembly Instructions Model No. 205364064 7pc High Dining Set - Chair Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. - 5 p.m., PST Monday - Friday Retain this manual for future use.
Contents Safety Instructions 3 Parts List 4 Assembly 5 Cleaning & Maintenance Warranty 11 IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Safety Instructions WARNING Please keep children out of the assembly area before assembly. WARNING Never use this product as support. Do not shake, lean, or climb on the product at any time. WARNING Do not place heavy objects on the chair. WARNING When not in use, secure the product in a cool and covered location. WARNING Do not locate the product near any heat source. WARNING Warning: Weight limit for the chairs is 250lbs (113.39Kg) for each set.
Parts List A Right Arm - 6 AA M6x35 Combination Bolt - 36+1 B Left Arm - 6 BB M6x30 Combination Bolt - 32+2 C Chair Back - 6 CC M6x25 Combination Bolt - 8+1 D Chair Seat - 6 DD M8x35 Combination Hex Bolt - 24+1 E Chair Connector - 6 EE M8 Washer 24+1 F Chair Base - 6 FF M8 Spring Washer - 24+1 G Pillow - 6 GG M8 Nut - 24+1 H Seat Cushion - 6 HH Hex Wrench - 2 II Wrench - 2 C A B H D G E F 205364064 4
Assembly STEP 1 Requires: AA, A, B, C Attaching The Right And Left Arms To The Chair Back Attach the right arm (A) and the left arm (B) to the chair back (C) using M6x35 combination bolts (AA). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
Assembly STEP 2 Requires: BB, A, B, D Attaching The Chair Seat To The Chair Arms Attach the chair seat (D) to the right and left arms (A & B) using M6x30 combination bolts (BB). NOTE: Tighten all the bolts using the hex wrench (HH).
Assembly STEP 3 Requires: DD, EE, FF, GG, D, E, F Attaching The Chair Seat To The Chair Base Place the assembled chair frame upside down on a soft surface. Attach the bottom of the chair seat (D) to the chair base (F) by inserting M8x35 combination hex bolts (DD) through the chair seat (D), the chair connector (E), M8 washers (EE), M8 spring washers (FF), and into M8 nuts (GG), as shown below. NOTE: Tighten all the bolts using the wrench (II).
Assembly STEP 4 Tightening The Bolts Once all bolts are in place, fully tighten all the bolts. Turn the chair right side up. Check and ensure the chair is tightly assembly and stable before use.
Assembly STEP 5 Requires: G, H Place The Seat Cushion And Pillow Place the seat cushion (H) and the pillow (G) to finish the assembly of the chair.
Cleaning & Maintenance • For best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. • Do not clean with abrasive materials, bleach, or solvents. • Store the seating set in a dry, sheltered place when not in use. • Keep the seating set away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Warranty Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Care and Maintenance Store furniture in an upright position.
Warranty Outdoor Furniture 1-YEAR LIMITED WARRANTY PROGRAM For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
Assembly Instructions Model No. 205364064 7pc High Dining Set - Table Questions, problems, or missing parts? Before returning to the store, call Customer Service. 1-866-988-3300 8 a.m. - 5 p.m., PST Monday - Friday Retain this manual for future use.
Contents Safety Instructions 3 Parts List 4 Assembly 5 Cleaning & Maintenance 8 Warranty 9 IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Safety Instructions WARNING Please keep children out of the assembly area before assembly. WARNING Never use this product as support. Do not shake, lean, or climb on the product at any time. WARNING When not in use, secure the product in a cool and covered location. WARNING Do not locate the product near any heat source.
Parts List I Table Top - 1 AA M6x35 Combination Bolt - 36+1 J Table Leg - 4 BB M6x30 Combination Bolt - 32+2 K Leg Connector - 1 CC M6x25 Combination Bolt - 8+1 L Lid - 1 DD M8x35 Combination Hex Bolt - 24+1 M Ice Bucket - 1 EE M8 Washer 24+1 N Ice Pack - 1 FF M8 Spring Washer - 24+1 GG M8 Nut - 24+1 HH Hex Wrench - 2 II Wrench - 2 L N I M J K 205364064 4
Assembly STEP 1 Requires: BB, I, J Connecting The Table Legs Place the table top (I) upside down on a soft surface. Attach the table legs (J) to the table top (I) using M6x30 combination bolts (BB). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
Assembly STEP 2 Requires: CC, J, K Attaching The Leg Connector To The Table Legs Attach the leg connector (K) to the table legs (J) using M6x25 combination bolts (CC). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
Assembly STEP 3 Requires: I, L, M, N Attaching The Chair Seat To The Chair Base Once all the bolts are in place, fully tighten all the bolts. Turn the table right side up. Ensure that all connections are secure. Carefully place the ice bucket (M) into the table top (I), and put the ice pack (N) into the ice bucket (M), then put the lid (L) over the ice bucket (M) and ice pack (N).
Cleaning & Maintenance Frames Considered the most durable material for outdoor furniture, metal can last a lifetime if you take care of it properly. Most metal outdoor furniture is finished with paint, varnish, or powder coating to prevent rust. While aluminum doesn’t rust–it can oxidize (causes pitting & dulls the finish). So maintaining your furniture will extend its life & make it easier to clean. • Wash all frames with a solution of mild soap (like dish soap) and water.
Warranty Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. Please call our Toll-Free Customer Service Hotline at: 1-866-988-3300 To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use. Care and Maintenance Store furniture in an upright position.
Warranty Outdoor Furniture 1-YEAR LIMITED WARRANTY PROGRAM For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
