Specifications

09-3
CAUTION :
Always connect the positive and negative
terminals of battery into the positive and
negative sockets provided in the constant
current battery charger.
Always disconnect the Negative (-ve)
terminal first & then the Positive (+ve).
When re-connecting the battery to the
vehicle after re-charging first connect
Positive(+ve) terminal & then the Negative(-
ve) terminal.
Keep all battery filler caps open while charging.
TEMPERATURE OF ELECTROLYTE :
3 Cool the electrolyte to about 30 deg. C
before filling it in the battery, just below the
maximum level indicated.
SOAKING PERIOD:
3 Keep the battery with electrolyte filled for about
half an hour before commencement of
charging. Top up the level with electrolyte if
necessary.
CC
CC
C
HARHAR
HARHAR
HAR
GINGGING
GINGGING
GING
A NEW BA NEW B
A NEW BA NEW B
A NEW B
AA
AA
A
TTERTTER
TTERTTER
TTER
YY
YY
Y
::
::
:
3 Connect the battery to the charger and
charge as detailed below..
Battery Duration Charging Current
12V 14AH 10Hrs 1.4 Amps
RECHARGINGRECHARGING
RECHARGINGRECHARGING
RECHARGING
USED USED
USED USED
USED
BB
BB
B
AA
AA
A
TTERIESTTERIES
TTERIESTTERIES
TTERIES
::
::
:
3 When the specific gravity of electrolyte is
less than 1.220, drain out the electrolyte and
refill with fresh electrolyte of strength 1.240
and charge the battery as detailed above.
3 when a charged battery remains unused for
more than 3 weeks, check the electrolyte
for correct specific gravity, top up if required
with distilled water up to maximum mark and
charge the battery.
CHARGING procedure:
3 Switch on the mains ‘ON’. See that the
charger indicator light is glowing
3 Switch on the charger ON/OFF switch
3 Disconnect the battery from the charger
when fully charged.
INDICATION OF FULL CHARGE:
3 Free gassing from electrolyte for more than
90 minutes.
3 3 consecutive reading taken in intervals of
30 minutes each to read constantly 1 .240
or more of specific gravity.
3 Voltage: 12.0 TO 13.2V