Specifications

07-15
3 Coat the caliper cylinders and Pistons with
clean brake fluid and install the Pistons into
the caliper body with the dished end facing
inwards.
3 If the Caliper Boot and Bellow are hard
or deteriorated, replace them with new
ones.
3 Smear fresh brake fluid on the caliper
boot and bellow and assemble them as
shown.
3 Install the Pad tension spring plate into
the Caliper body.
3 Assemble Bleed screw with the dust cap
on the caliper body.
3 Assemble the Mounting Bracket on the
caliper Body.