Specifications

05-69
 Assemble inlet and exhaust pushrods.
 Assemble the inlet and exhaust rocker
bearing with dowel and tighten allen
screws
 Assemble the Inlet & Exhaust Rocker
covers, dowels & rubber gasket then
tighten rocker cover bolt with rubber
washer (Torque 1 KG-M)) .
 Assemble tappet door by applying
LOCKTITE 5699 RTV silicon gasket on
Crank case RH then tighten screws
(Torque 0.60 KG-M).
 Tighten the swing arm nut to specified
torque.