Instruction manual

8 | RoyalCore
4. To set the probe to a specic temperature:
• When you press the ON button, the screen will display “250ºF. ”
• The temperature will advance or decrease in 5 degree increments
by pulsing the up/down buttons.
• Hold down the up/down arrow to advance or decrease the
temperature in 25 degree increments.
• Once you have entered the desired temperature, it will
automatically start in three seconds.
• When the selected temperature has been reached, the probe will
beep three times.
5. Cooking rice is made easier with our pre-programmed settings.
Start by inserting your ingredients (see chart below).
• Place the cover on the skillet and close the Redi-Temp
®
valve.
• Press the up or down arrow until your desired setting is
displayed.
• The RoyalCore will automatically heat to boiling, and then
cook the rice. Once cooking is completed, the probe will sound
3 times and turn off.
• The RICE ONE setting is low with a shorter cooking time that
should be used to cook 1-2 cups of rice.
• The RICE TWO setting is high with a longer cooking time that
should be used to cook from 3-4 cups of rice.
TYpe rice quaNTiTY WaTer quaNTiTY seTTiNg*
STANDARD RICE VARIETIES 1 CUP 1 CUP R1
STANDARD RICE VARIETIES 2 CUPS 2 CUPS R1
STANDARD RICE VARIETIES 3 CUPS 3 CUPS R2
STANDARD RICE VARIETIES 4 CUPS 4 CUPS R2
JASMINE 2 CUPS 3 1/2 CUPS R1
CALROSE 2 CUPS 2 3/4 CUPS R1
CARE AND USE
* These are guidelines and results may vary based on quantity, type and brand.
Do not exceed 4 cups of dry measure. DO NOT EXCEED CAPACITY.