Instruction manual
RoyalCore | 7
CLEANING BEFORE USE:
Before using your RoyalCore for the rst time;
1. Remove from packaging and peel off labels.
2. Wash the base and cover in warm, soapy water combined with 1
cup of vinegar per gallon of water. Rinse in clear, warm water
and dry thoroughly with a soft cloth or towel.
3. Dry the outside of the RoyalCore completely before connecting
the Temperature Probe, paying close attention to the inlet.
4. Remove the thin protective lm covering the Temperature Probe.
CAUTION: To prevent risk of electrical shock, always remove
Temperature Probe before immersing in water.
DO NOT IMMERSE THE Temperature Probe.
Use only with the Temperature Probe provided.
OPERATING INSTRUCTIONS:
1. Place on a dry, level, heat-resistant surface. Ensure your hands are
dry. CAUTION: Always operate at least 4”/10cm from wall.
2. Insert the Temperature Probe into the inlet on the cooker
base. Plug into electric outlet. Always preheat the RoyalCore
uncovered, unless the recipe species to start with it cold. If food
is added directly from the freezer, use heat setting as directed on
guide but allow for longer cooking time. If oil, shortening, butter
or margarine are used in a recipe for frying or sauteing, add them
to the appliance before preheating.
3. The probe can be set to a specic temperature, or you can use a
pre-programmed setting for rice.
CARE AND USE