Installation Instructions

28
28
Conceal Window Trim Assembly
Shown are three methods for
assembling Conceal trim around
windows. The same basic rules
outlines on page 21 apply.
y Make sure to leave 1/16” space
on all four sides of the window for
expansion and contraction of the
trim.
y It is suggested that the trim
frames be
assembled
prior to the
installing on
the wall.
y When mitering
corners, it is
recommended
that cement
be used.
y When square
cutting joints,
remove pieces
as shown to
create a continuous
channel.
y When securing frame to the
wall, fasteners must not
penetrate through the siding
pocket.
y Fasten the frame using the
fasteners outlined on page 8.
y ,QVWDOOKHDGÁDVKLQJLQVLGHWKH
pocket of the header trim.
Buglehead
screws
mitered
corners
Pocket hole
screws
mitered
corners
Pocket hole
screws
square
corners