Installation Guide
EZ-Trim Surround Kit
Installation Instructions
10. Attaching the Sill: Invert
the part into the face up
position (turn it over).
Apply PVC glue to the
mating parts of the joints
and attach the Sill in the
same manner as the head.
11. Attachment of optional Ornamental Header – Measure and
shorten the inside of Crown Header to the width of the Head
by cutting either end with a 45 degree miter cut. Be sure to
measure and cut from the shortest point on the existing 45
degree ends.
12. Apply glue to the face of the head, attach part and secure
from the back side using the screws provided.
13. Separate the corner keys by breaking apart. Use the long
corner keys if a ush mount is desired or the short corner
keys to leave ¾” gap for use with J-Channel or siding that is
ush with the sides of the surround. Attach the corner keys
by gluing and tacking in place.
14. Mount and attach the surround to the wall using at least
two (2) fasteners every 16” on each member. Construction
adhesive may also be used in addition to fasteners.
15. Painting instructions: EZ-Trim does not require painting
for protection, but can be painted. 100% acrylic latex or
100% acrylic latex with a urethane additive should be used to
achieve superior coating adhesion and exibility. Only light to
medium colored paints with a light reective value (LRV) of
56 units or greater should be applied to EZ-Trim. Using paints
with an LRV below 56 units will void our product warranty.
Consult the paint manufacturer for the LRV of your paint. To
maintain the warranty for customer colors in darker shades,
use heat reective paint with Vinyl-Safe Technology. (A color
is considered dark if it possessing a LRV of 55 or less.)
(Continued)
For additional information or questions on installation, please call 800-368-3117.
SCAN
FOR VIDEO OF
INSTALLATION