Installation Instructions
10
10
Helpful tip for gluing two pieces of PVC trim
y Two Part Gluing Method: PVC adhesive along with
Cyanoacrylate (super glue) and activator as a
“clamp” can be
used. However,
these glues are
QRWVXIÀFLHQWWR
use alone. They
must be used in
conjunction with
PVC cement.
(2P10 is an only
an example of a
Cyanoacrylate/Act
ivator system.
There are others.)
Cyanoacrylate Glue
& Activator
PVC Cement
!
"
#
$
%
&
'
(
) *
+ ,
-
Using the two-part gluing system
y First, place a bead of PVC
cement along one edge of one
of the pieces to be glued.
y Next, place a similar bead of
Cyanoacrylate glue.
y Spray the activator along the
other piece to be glued. Do not
spray the coated face of the
piece.
y Carefully join the two pieces
together making sure that they
are aligned properly. Hold the
pieces in place for 5-10
seconds or until the
Cyanoacrylate glue adheres.
This will allow for installation of
the piece and givHVXIÀFLHQW
time for the PVC cement to
create a permanent bond.