Project

8
Step 4: Shelf
4.1 – Shelf Parts
Per the drawing, cut the parts from Handi Panel. When
cutting, make sure the emboss portion will be hidden
after assembly.
4.2 – Assemble Shelf
PVC Glue the back brace to the shelf, then add the
angled supports.
4.3 – Hang Grouping
Attach the paper holder to the wall using wood screws
and wall anchors (if required). Conrm the product is
level prior to attachment. Next, level and position white
board location. Mark the hole location on the wall and
proceed with wall anchor install. You will sandwich the
clear panel between the screw caps and panel during
attachment. Do not over tighten. Finally, secure the shelf
with wood screw and anchors utilizing the predrilled
attachment holes.
Shell Parts
Hang Grouping
Assemble
Shelf parts
4.1 – Shelf Parts
Per the drawing, cut the parts from Handi
Panel. When cutting, make sure the emboss portion
will be hidden after assembly.
4.2 – Assemble Shelf
PVC Glue the back brace to the shelf, then
add the angled supports.
4.3 – Hang Grouping
Attach the paper holder to the wall using
wood screws and wall anchors (if required). Confirm
the product is level prior to attachment.
Next, level and position white board location. Mark
the hole location on the wall and proceed with wall
anchor install. You will sandwich the clear panel
between the screw caps and panel during
attachment. Do not over tighten.
Finally, secure the shelf with wood screw and
anchors utilizing the predrilled attachment holes.
Step 4 Shelf
Assemble
Hang Grouping
Shelf parts
4.1 – Shelf Parts
Per the drawing, cut the parts from Handi
Panel. When cutting, make sure the emboss portion
will be hidden after assembly.
4.2 – Assemble Shelf
PVC Glue the back brace to the shelf, then
add the angled supports.
4.3 – Hang Grouping
Attach the paper holder to the wall using
wood screws and wall anchors (if required). Confirm
the product is level prior to attachment.
Next, level and position white board location. Mark
the hole location on the wall and proceed with wall
anchor install. You will sandwich the clear panel
between the screw caps and panel during
attachment. Do not over tighten.
Finally, secure the shelf with wood screw and
anchors utilizing the predrilled attachment holes.
Step 4 Shelf
Assemble
Hang Grouping
Shelf parts
4.1 – Shelf Parts
Per the drawing, cut the parts from Handi
Panel. When cutting, make sure the emboss portion
will be hidden after assembly.
4.2 – Assemble Shelf
PVC Glue the back brace to the shelf, then
add the angled supports.
4.3 – Hang Grouping
Attach the paper holder to the wall using
wood screws and wall anchors (if required). Confirm
the product is level prior to attachment.
Next, level and position white board location. Mark
the hole location on the wall and proceed with wall
anchor install. You will sandwich the clear panel
between the screw caps and panel during
attachment. Do not over tighten.
Finally, secure the shelf with wood screw and
anchors utilizing the predrilled attachment holes.
Step 4 Shelf
Assemble
Hang Grouping
Shelf parts
4.1 – Shelf Parts
Per the drawing, cut the parts from Handi
Panel. When cutting, make sure the emboss portion
will be hidden after assembly.
4.2 – Assemble Shelf
PVC Glue the back brace to the shelf, then
add the angled supports.
4.3 – Hang Grouping
Attach the paper holder to the wall using
wood screws and wall anchors (if required). Confirm
the product is level prior to attachment.
Next, level and position white board location. Mark
the hole location on the wall and proceed with wall
anchor install. You will sandwich the clear panel
between the screw caps and panel during
attachment. Do not over tighten.
Finally, secure the shelf with wood screw and
anchors utilizing the predrilled attachment holes.
Step 4 Shelf
Assemble
Hang Grouping