Project

7
Step 3: Assembly
3.1 – Insert Bottom
Lay the frame assembly on its side and PVC Glue the
bottom Panel to the 5/8” band.
3.2– Allow Glue to Cure
Stand frame upright and allow glue adequate cure time
before moving to next step.
3.3 – Install dividers
Glue the dividers to the bottom and screw through sides
of the frame to complete install.
With spacers clamped in position, use the 2-1/2” trim
head screws to secure the door and act as hinges.
3.4 – Band the Top
Fasten the 1-1/2” x ¾” band around the top panel using
screws and PVC glue.
Insert Bottom
Install Dividers
Allow Glue to Cure
Band the Top