Project

6
Step 2: Assembly
1.1 – Assemble Legs
PVC Glue the 3-1/2” x 23” boards and clamp as shown
in the photo
1.2 – Construct Main Frame
Using trim head screws and PVC Cement, connect the
5-1/2” x 44 & 18-1/2” boards.
1.3 – Install 5/8” Cleat
Install the 5/8” x 5/8” retention band around the bottom
portion of the frame with trim head screws and PVC glue.
This will be used to hold the bottom panel in place.
1.4 – Attach Legs
The legs are to be screwed and glued to the frame. Pay
attention to the orientation of the legs, the widest side is
to be placed on the longest side of the frame.
Assemble Legs
Install 5/8” Cleat
Construct Main Frame
Attach Legs