Project

9
Step 5: Leg Supports
5.1 – Measure Support Length
The distance between the legs will vary due to support
location, washer assembly and tightness of bolts.
Measure distance on all leg assemblies.
5.2 – Cut and Bore
Cut 3-1/2” X ¾” PVC boards for each leg assembly.
OPTION – use 3” hole saw to cut a circle in the center of
the support. This will act as cup holder during play.
5.3 – Attach to the Leg Assembly
Attach support with PVC glue. Fasteners (nails or
screws) are an option.
NOTE: use scrap material (3/4”) as spacers under
the support block to provide proper offset during the
clamping process.
Measure
Attach to the Leg Assembly
Cut and Bore