Project

8
I nsert B olt and wash er
4.1 – Insert Bolt and washer
Th e leg assembly will req uire a wash er
between legs and frame to allow folding for storage.
4.2 – Attach Legs
Slide th e leg over th e bolt and against th e
wash er; place anoth er wash er and th e nut on th e
bolt. Tigh ten snugly with a wrench .
4.3 – Repeat process
U se th e same routine for th e remaining legs
N O TE : th e interior leg sh ould mounted on th e
inside of th e inner framing support.
S tep 4 A ttac h ing th e Legs
A ttac h Legs
R ep eat p roc ess
Step 4: Attaching the Legs
4.1 – Insert Bolt and Washer
The leg assembly will require a washer between legs
and frame to allow folding for storage.
4.2 – Attach Legs
Slide the leg over the bolt and against the washer; place
another washer and the nut on the bolt. Tighten snugly
with a wrench.
4.3 – Repeat Process
Use the same routine for the remaining legs
NOTE: the interior leg should mounted on the inside of
the inner framing support.
Insert Bolt and Washer
Repeat Process
Attach Legs